OPERATION
78 eng
NOTE: Confirm that the reverse lock lever is at the lock position.
a - Reverse lock lever: R =
Release, L = Lock
Remote control models: Shift the outboard only when the engine
is at idle speed. To change Forward (F) to Reverse (R), first idle
the engine and shift into Neutral (N). With the engine still
running, slowly engage and gradually increase the reverse
speed.
NOTE: Confirm that the reverse lock lever is at the lock position.
a - Reverse lock lever: R =
Release, L = Lock
Stopping the Engine
1. Tiller handle models: Reduce the speed to trolling speed by
turning the throttle grip to the slow position.
2. Place the shift lever at Neutral (N).
To Next Page
Loading...
