OPERATION
eng 77
Remote control models: Move the throttle only lever to the lower
position, then shift the control lever to Forward (F) position.
NOTE: Forward running is not possible unless the throttle only
lever is at the lower position.
a - Fully opened position
b - Fully closed position
c - Throttle range
d - Shift range
e - Neutral (N)
f - Forward (F)
g - Reverse (R)
h - Throttle only lever
REVERSE
Tiller handle models: Move the shift lever to the Reverse (R)
position swiftly when the engine speed drops to its lowest level.
To Next Page
Loading...
