FEATURES & CONTROLS
eng 63
SHALLOW WATER RUNNING POSITION
Turn the reverse lock lever to release side and tilt up the engine
to set the engine to shallow water running position.
a - Reverse lock lever
TILT DOWN FROM SHALLOW WATER RUNNING
POSITION
Turn the reverse lock lever to lock side, lift up the engine slightly,
and put it down. Reverse lock is done automatically.
a - Reverse lock lever
IMPORTANT: While in shallow water drive position, do not
operate the outboard in reverse. Operate the outboard at slow
speed and keep the cooling water intake submerged.
Trim Adjustment
Trim of the motor can be adjusted to suit the transom angle and
loading conditions of your boat. Be sure to maintain the
anti‑ventilation plate parallel to the water level during cruising.
To Next Page
Loading...
