FEATURES & CONTROLS
66 eng
IMPORTANT: The trim tab also acts as an anode to prevent
galvanic corrosion. Do not apply any paint, grease, or other
material to the surface of the trim tab.
NOTE: Trim tab adjustment will have little effect reducing
steering torque if the outboard is installed with the anti‑ventilation
plate approximately 50 mm (2 in.) or more above the boat
bottom.
The trim tab is located under the anti‑ventilation plate.
• If the boat steers toward the left, set the trim tab in the
direction of B.
• If the boat steers toward the right, set the trim tab in the
direction of C.
a - Trim tab
b - Steers toward the left, set the trim tab in the direction of B
c - Steers toward the right, set the trim tab in the direction of
C
d - Turning left
e - Turning right
To Next Page
Loading...
