Mercury 25 2-Stroke - Page 82

OPERATION
72 eng
9. Place the control lever at Neutral (N), and move the throttle
only lever to the open position.
a - Fully opened
position
b - Fully closed
position
c - Throttle only lever
d - Ignition key switch
e - Lanyard stop switch
SET THE LANYARD STOP SWITCH TO RUN POSITION
Be sure to connect the lanyard stop switch to your body. The
engine will shut down if the stop lanyard is disconnected.
Tiller handle models
a - Lanyard stop
switch
b - Stop switch lock
c - Hook
37715
N
c
d
e
a
b
37465
a
b
c