Remote Control Features
Your boat may be equipped with one of the Mercury Precision or Quicksilver
remote controls shown. If not, consult your dealer for a description of the
functions and operations of the remote control.
a - Control handle – forward, neutral, reverse
b - Neutral release lever
c -
Trim/tilt switch (if equipped) – Refer to Features and Controls –
Power Trim and Tilt
d -
Lanyard stop switch – Refer to General Information – Lanyard Stop
Switch
e -
Lanyard – Refer to General Information – Lanyard Stop Switch
f - Throttle friction adjustment – Console controls require cover removal for
adjustment
g - Ignition key switch – "OFF," "ON," START"
h -
Fast idle lever – Refer to Operation – Starting the Engine
i -
Throttle only button – Refer to Operation – Starting the Engine
Tiller Handle Models
FEATURES
• Steering friction adjustment ‑ Adjust this lever to achieve the desired
steering friction (drag) on the tiller handle. Move the lever to the left to
tighten friction or move to the right to loosen friction.
To Next Page
Loading...
