2. Remove the fill cap and check the fluid level. The fluid level should be
even with the bottom of the fill hole. Add Quicksilver or Mercury Precision
Lubricants Power Trim and Steering Fluid. If not available, use automotive
(ATF) automatic transmission fluid.
Tube Ref
No.
Description Where Used Part No.
114
Power Trim and
Steering Fluid
Power trim system 92-858074K01
Changing Engine Oil
ENGINE OIL CAPACITY
Capacity
Fluid Type
Engine oil
1.8 liter
(1.9 quarts)
Mercury Precision Parts or Quicksilver
10W‑30 4‑Stroke Marine Engine Oil
Mercury Precision Parts or Quicksilver
Synthetic Blend 4‑Stroke Marine Engine Oil
OIL CHANGING PROCEDURE
1. Tilt the outboard up to the trailer position.
MAINTENANCE
eng 69
To Next Page
Loading...
