ELECTRIC FUEL PUMP
If an electric fuel pump is used, the fuel pressure must not exceed 27.58 kPa
(4 psi) at the engine. If necessary, install a pressure regulator to regulate the
pressure.
Top Cowl Removal and Installation
TOP COWL REMOVAL
1. Unlock the cowl latch located at the rear of the engine by lifting the latch
up.
2. Lift up on the rear of the cowl and disengage the front hook.
TOP COWL INSTALLATION
1. Engage the front hook and push the top cowl onto the lower cowl.
2. Push the cowl latch down to lock the cowl in place.
INSTALLATION
82 eng
To Next Page
Loading...
