34
FEATURES & CONTROLS
4
2–3
1
c
Tilting Operation (Sport Master Gear Case)
To tilt outboard, shut off the engine and press the trim/tilt switch to
the up position. The outboard will tilt up until the switch is released
or it reaches its maximum tilt position.
1 Push in on the tilt support release knob.
2 Move tilt support lever into locking position and lower outboard
to rest on the tilt support lever.
3 Disengage the tilt support lever by raising the outboard off the
support lever and rotating the lever up until it locks. Lower the
outboard.
osc1
Auxiliary Tilt Switch
4
This switch (c) can be used to tilt the outboard up or down using
the power trim system.
To Next Page
Loading...
