57
oh
MAINTENANCE
goh112
12
4-53
N
Propeller Replacement
WARNING
If the propeller is rotated while the engine is in gear, there is
the possibility that the engine will crank over and start. To pre-
vent this accidental engine starting and possible serious inju-
ry caused from being struck by a rotating propeller, always
shift outboard to neutral position and remove spark plug
leads before you service the propeller.
1 Shift outboard to neutral (N) position.
2 Remove spark plug leads to prevent engine from starting.
3 Straighten the bent tabs on the propeller nut retainer.
4 Place a block of wood between gear case and propeller to hold
propeller and remove propeller nut.
5 If propeller is seized to the shaft and cannot be removed, consult
an authorized dealer.
(continued on next page)
To Next Page
Loading...
