69
oi
STORAGE
oic7
Protecting External Outboard Components
1. Lubricate all outboard components listed in the Inspection and
Maintenance Schedule.
2. Touch up any paint nicks. See dealer for touch-up paint.
3. Spray Mercury Precision Corrosion Guard (92-802878-55) on
external metal surfaces, (Do not apply on corrosion control
anodes).
oie1
Gear Case
1. Drain and refill the gear case lubricant (refer to maintenance pro-
cedure).
BATTERY STORAGE
1. Follow the battery manufacturers instructions for storage and re-
charging.
2. Remove the battery from the boat and check water level. Re-
charge if necessary.
3. Store the battery in a cool, dry place.
4. Periodically check the water level and recharge the battery dur-
ing storage.
To Next Page
Loading...
