Mercury 4-STROKE User Manual

3.
Set the lanyard stop switch to RUN position. Refer to General
Information—Lanyard Stop Switch.
19791
4. Set the tiller handle gear shift to the neutral start position.
57677
5.
Cold engine ‑
• Pull the choke knob out two detent positions for starting a cold engine.
The choke is closed in this position.
• After the engine is running, push the choke knob in one detent. The
choke is partially open in this position.
• After the engine starts to warm up, push the choke knob in. The choke
is open in this position.
a - Choke is open
b - Choke is partially open
c - Choke is closed
IMPORTANT: Outboards with battery charging capabilities must not be
operated with battery cables disconnected from the battery. Damage to the
charging system may result.
a
b
c
57690
OPERATION
68 eng

Mercury 4-STROKE Specifications

General

Engine Type	4-Stroke
Fuel Type	Gasoline
Cooling System	Water-cooled
Ignition System	CDI (Capacitor Discharge Ignition)
Starting	Manual / Electric
Shaft Length	15", 20", 25"
Max Power	Varies by model
Full Throttle RPM Range	Varies by model
Fuel Induction System	EFI / Carbureted
Steering	Remote / Tiller
Weight	Varies by model
Fuel Tank Capacity	Varies by model, some models include external tank
Oil Capacity	Varies by model