Mercury 40 4-Stroke - Page 88

OUTBOARD INSTALLATION
82
5. Fasten the throttle cable to the mounting stud with a flat washer and locknut. Tighten the locknut
to the specified torque.
28494
b
a
c
d
e
a - Throttle cable
b - Cotter pin retainer
c - Flat washer
d - Locknut
e - Cable barrel
Description Nm lb. in. lb. ft.
Throttle cable locknut 6 53
6. Reinstall the access cover with two bolts. Tighten the bolts to the specified torque.
28500
a
a -
Access cover