MAINTENANCE
100 eng
!
WARNING
Incorrect cable lubrication can cause hydraulic lock, leading
to serious injury or death from loss of boat control.
Completely retract the end of the steering cable before
applying lubricant.
• Steering cable grease fitting (if equipped) ‑ Rotate
steering wheel to fully retract the steering cable end into
the outboard tilt tube. Lubricate through fitting.
a - Fitting
b - Steering cable end
3. Lubricate the following with lightweight oil.
• Steering link rod pivot points ‑ Lubricate points.
To Next Page
Loading...
