Mercury 40 jet fourstroke - Stopping the Engine

OPERATION
eng 79
• Remote control models ‑ When shifting, always stop at the
neutral position and allow the engine speed to return to idle.
26779
• Tiller handle models ‑ Reduce the engine speed to idle
before shifting.
26842
• Always shift the outboard into gear with a quick motion.
• After shifting the outboard into gear, advance the remote
control lever or rotate the throttle grip (tiller handle) to
increase speed.
Stopping the Engine
1. Remote control models ‑ Reduce the engine speed and shift
the outboard to neutral position. Turn the ignition key to
"OFF" position.
26843