Mercury 40 jet fourstroke - MAINTENANCE LOG; Maintenance Log

OUTBOARD INSTALLATION
eng 123
The outboard must be secured to the transom with the four
13 mm (1/2 in.) diameter mounting bolts and locknuts provided.
Install two bolts through the upper set of mounting holes and two
bolts through the lower set of mounting holes.
a - 1/2 in. diameter bolt (4)
b - Flat washer (4)
c - Locknut (4)
Description Nm lb‑in. lb‑ft
Outboard mounting locknuts and
bolts
75 55
Steering Cable ‑ Starboard Side Routed Cable
1. Lubricate the entire cable end.
10261
Tube
Ref No.
Description Where Used Part No.
95
2-4-C with
PTFE
Steering cable end 92-802859A 1
28481
b
c
a