MAINTENANCE
102 eng
Changing Engine Oil
ENGINE OIL CAPACITY
Capacity Fluid Type
Engine oil
3.0 Liter
(3 U.S. Quarts)
Mercury Precision Parts or Quicksilver
Synthetic Blend 25W‑40 4‑Stroke Outboard Oil
Mercury Precision Parts or Quicksilver 10W‑30
4‑Stroke Outboard Oil
OIL CHANGING PROCEDURE
1. Tilt the outboard up to the trailer position.
2. Turn the steering on the outboard so that the drain hole is
facing downward. Remove drain plug and drain engine oil
into an appropriate container. Lubricate the seal on the drain
plug with oil and reinstall.
a - Drain plug
CHANGING OIL FILTER
1. Place a rag or towel below the oil filter to absorb any spilled
oil.
2. Unscrew the old filter by turning the filter to the left.
3. Clean the mounting base. Apply a film of clean oil to the
filter gasket. Do not use grease
To Next Page
Loading...
