Mercury 40 jet fourstroke - Throttle Grip Friction Adjustment - Tiller Handle Models; Steering Friction Adjustment - Tiller Handle Models

FEATURES AND CONTROLS
eng 63
AUXILIARY TILT SWITCH
The auxiliary tilt switch can be used to tilt the outboard up or
down using the power trim system.
a - Auxiliary tilt switch
Throttle Grip Friction Adjustment ‑ Tiller Handle
Models
Throttle grip friction knob ‑ Turn friction knob to set and maintain
the throttle at desired speed. Turn knob clockwise to tighten
friction and turn knob counterclockwise to loosen friction.
a - Loosen friction
b - Tighten friction
Steering Friction Adjustment ‑ Tiller Handle Models
NOTE: Steering friction adjustment is only provided on models
with tiller handles.
Adjust this lever to achieve the desired steering friction (drag) on
the tiller handle. Move lever to the left to tighten friction or move
to the right to loosen friction.
a
28534
a
b
19807