Mercury 40 jet fourstroke - Page 86

OPERATION
74 eng
3. Set the lanyard stop switch to "RUN" position. Refer to
General Information ‑ Lanyard Stop Switch.
19791
4. Shift outboard to neutral ("N") position.
N
26838
5. Move the throttle‑only lever to the fully closed position or
press the throttle‑only button.
a - Fully closed position
b - Maximum fast idle speed position
6. Starting a flooded engine ‑ Advance the throttle‑only lever or
control handle to the maximum throttle‑only position and
continue to crank the engine for starting. Immediately
reduce engine speed after engine starts.
a
b
a
b
26840