OPERATION
62
b. Pull the starter rope slowly until starter engages, then pull
rapidly to crank the engine. Allow rope to return slowly.
Repeat until engine starts. If engine begins to stall, reprime
until engine is running.
3072
10.Electric starting models ‑ Turn ignition key to the "START"
position and start the engine. If engine is cold, push in on key
to choke engine. If engine fails to start in 10 seconds, wait 30
seconds and try again. If engine begins to stall, reprime (push
key in) until engine is running.
11.Starting flooded engine ‑ Advance the throttle grip to the
maximum position. Without activating primer, start engine
following starting procedure. Immediately start to reduce
engine speed after engine starts.
12.Check for a steady stream of water flowing out of the water
pump indicator hole.
To Next Page
Loading...
Need help?
General
