Mercury 50 4-Stroke User Manual

OUTBOARD INSTALLATION
102
IMPORTANT: Check with your dealer before installing
accessories. The misuse of approved accessories or the use of
non‑approved accessories can damage the product.
Some accessories not manufactured or sold by Mercury Marine
are not designed to be safely used with your outboard or outboard
operating system. Acquire and read the installation, operation, and
maintenance manuals for all your selected accessories.
ELECTRIC FUEL PUMP
If an electric fuel pump is used, the fuel pressure must not exceed
27.58 kPa (4 PSI) at the engine. If necessary, install a pressure
regulator to regulate the pressure.
INSTALLATION SPECIFICATIONS
A
A
B
2763
a - Minimum transom
opening
b - Engine center line for dual
engines
Minimum Transom Opening
Single engine (remote) 48.3 cm (19 in.)
Single engine (tiller) 76.2 cm (30 in.)
Dual engines 101.6 cm (40 in.)
Engine Center Line
Minimum 66 cm (26 in.)

Mercury 50 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	50 hp
Cylinders	3
Starting System	Electric
Steering	Remote
Displacement	747 cc
Fuel Induction System	EFI
Alternator Amp	18 amp
Shaft Length	20 in
Full Throttle RPM Range	5000-6000 RPM
WOT Range	5000-6000 RPM
Fuel Tank Capacity	External Tank Required