EasyManuals Logo

Mercury 50 4-Stroke User Manual

Mercury 50 4-Stroke
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
FUEL & OIL
36
The fuel system components on your Mercury Marine engine will
withstand up to 10% alcohol content in the gasoline. We do not
know what percentage your boat's fuel system will withstand.
Contact your boat manufacturer for specific recommendations on
the boat's fuel system components (fuel tanks, fuel lines, and
fittings). Be aware that gasolines containing alcohol may cause
increased:
Corrosion of metal parts
Deterioration of rubber or plastic parts
Fuel permeation through rubber fuel lines
Starting and operating difficulties
!
WARNING
Fuel leakage is a fire or explosion hazard, which can cause
serious injury or death. Periodically inspect all fuel system
components for leaks, softening, hardening, swelling, or
corrosion, particularly after storage. Any sign of leakage or
deterioration requires replacement before further engine
operation.
Because of possible adverse effects of alcohol in gasoline, it is
recommended that only alcohol‑free gasoline be used where
possible. If only fuel containing alcohol is available, or if the
presence of alcohol is unknown, increased inspection frequency
for leaks and abnormalities is required.
IMPORTANT: When operating a Mercury Marine engine on
gasoline containing alcohol, storage of gasoline in the fuel tank for
long periods should be avoided. Long periods of storage, common
to boats, create unique problems. In cars, alcohol‑blend fuels
normally are consumed before they can absorb enough moisture
to cause trouble, but boats often sit idle long enough for phase
separation to take place. In addition, internal corrosion may take
place during storage if alcohol has washed protective oil films from
internal components.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 50 4-Stroke and is the answer not in the manual?

Mercury 50 4-Stroke Specifications

General IconGeneral
Engine Type4-Stroke
Horsepower50 hp
Cylinders3
Starting SystemElectric
SteeringRemote
Displacement747 cc
Fuel Induction SystemEFI
Alternator Amp18 amp
Shaft Length20 in
Full Throttle RPM Range5000-6000 RPM
WOT Range5000-6000 RPM
Fuel Tank CapacityExternal Tank Required

Related product manuals