Name: Mercury 50 4-Stroke
Brand: Mercury
Rating: 5 (1 reviews)

To Next Page

To Previous Page

FUEL & OIL

3. Pull the dipstick back out again and observe the oil level. If the

oil level is low, remove the oil filler cap and fill to (but not over)

the upper oil level with the recommended oil.

IMPORTANT: Inspect oil for signs of contamination. Oil

contaminated with water will have a milky color to it; oil

contaminated with fuel will have a strong fuel smell. If

contaminated oil is noticed, have the engine checked by your

dealer.

4. Push the dipstick back in all the way, then flip the handle down

to lock the dipstick in place. Reinstall the oil filler cap and hand

tighten securely.

28412

a - Full mark

b - Add mark

c - Dipstick

d - Oil filler cap

Questions and Answers:

Need help?

Do you have a question about the Mercury 50 4-Stroke and is the answer not in the manual?

Mercury 50 4-Stroke Specifications

General