Mercury 50 4-Stroke User Manual

FEATURES & CONTROLS
50
If adjustment is necessary, loosen trim tab bolt and make small
adjustments at a time. If the boat turns more easily to the left, move
the trailing edge of trim tab to the left. If the boat turns more easily
to the right move the trailing edge of trim tab to the right. Retighten
bolt and retest.
MODELS WITH POWER TRIM
Operate your boat at normal cruising speed, trimmed to desired
position. Turn your boat left and right and note the direction the
boat turns more easily.
If adjustment is necessary, loosen trim tab bolt and make small
adjustments at a time. If the boat turns more easily to the left, move
the trailing edge of trim tab to the left. If the boat turns more easily
to the right move the trailing edge of trim tab to the right. Retighten
bolt and retest.

Mercury 50 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	50 hp
Cylinders	3
Starting System	Electric
Steering	Remote
Displacement	747 cc
Fuel Induction System	EFI
Alternator Amp	18 amp
Shaft Length	20 in
Full Throttle RPM Range	5000-6000 RPM
WOT Range	5000-6000 RPM
Fuel Tank Capacity	External Tank Required