EasyManuals Logo

Mercury 50 4-Stroke User Manual

Mercury 50 4-Stroke
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
OPERATION
61
!
WARNING
The neutral‑speed‑protection device is inoperative when
starting the engine with the emergency starter rope. Set the
engine speed at idle and the gear shift in neutral to prevent the
outboard from starting in gear.
3. Electric start models ‑ Turn the ignition key to "ON" position.
26846
!
WARNING
High voltage is present any time the key is turned on, especially
when starting or operating the engine. Do not touch ignition
components or metal test probes and stay clear of spark plug
leads when performing live tests.
!
WARNING
The exposed moving flywheel can cause serious injury. Keep
your hands, hair, clothing, tools, and other objects away from
engine when starting or running the engine. Do not attempt to
reinstall the flywheel cover or top cowl when engine is running.
4. Place the starter rope knot into the flywheel notch and wind
the rope clockwise around the flywheel.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 50 4-Stroke and is the answer not in the manual?

Mercury 50 4-Stroke Specifications

General IconGeneral
Engine Type4-Stroke
Horsepower50 hp
Cylinders3
Starting SystemElectric
SteeringRemote
Displacement747 cc
Fuel Induction SystemEFI
Alternator Amp18 amp
Shaft Length20 in
Full Throttle RPM Range5000-6000 RPM
WOT Range5000-6000 RPM
Fuel Tank CapacityExternal Tank Required

Related product manuals