MAINTENANCE
73
5. Pull the propeller straight off the shaft. If the propeller is seized
to the shaft and cannot be removed, have the propeller
removed by an authorized dealer.
6. Coat the propeller shaft with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with Teflon.
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft
92-802867Q
1
95
2-4-C with Teflon Propeller shaft 92-802859A1
IMPORTANT: To prevent the propeller hub from corroding and
seizing to the propeller shaft (especially in salt water), always
apply a coat of the recommended lubricant to the entire propeller
shaft at the recommended maintenance intervals, and each time
the propeller is removed.
To Next Page
Loading...
