Mercury 50 4-Stroke - Page 85

MAINTENANCE
77
6. Coat the propeller shaft with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with Teflon.
26902
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft
92-802867Q
1
95
2-4-C with Teflon Propeller shaft 92-802859A1
IMPORTANT: To prevent the propeller hub from corroding and
seizing to the propeller shaft (especially in salt water), always
apply a coat of the recommended lubricant to the entire propeller
shaft at the recommended maintenance intervals, and each time
the propeller is removed.
7. Flo‑Torq I drive hub propellers ‑ Install the thrust washer,
propeller, continuity washer, thrust hub, propeller nut retainer,
and propeller nut onto the shaft.
a
b
c
d
e
f
26908
a - Propeller nut
b - Propeller nut retainer
c - Thrust hub
d - Continuity washer
e - Propeller
f - Thrust washer