Mercury 75 OptiMax User Manual

MAINTENANCE
eng 77
4. Place a block of wood between the gearcase and propeller
and remove the propeller nut.
26901
5. Pull the propeller straight off the shaft. If the propeller is
seized to the shaft and cannot be removed, have the
propeller removed by an authorized dealer.
INSTALLATION
IMPORTANT: To prevent the propeller hub from corroding and
seizing to the propeller shaft (especially in saltwater), always
apply a coat of the recommended lubricant to the entire propeller
shaft at the recommended maintenance intervals and also each
time the propeller is removed.
1. Coat the propeller shaft with Quicksilver or Mercury
Precision Lubricants Anti‑Corrosion Grease or 2‑4‑C with
PTFE.
26902
Tube
Ref No.
Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft 92-802867Q 1

Mercury 75 OptiMax Specifications

General

Brand	Mercury
Model	75 OptiMax
Category	Outboard Motor
Language	English