Mercury 8 User Manual

ENGINE INSTALLATION
115
6. Position the shift cable into the rubber grommet and place the
cable barrel into the barrel receptacle.
28096
a
b
c
d
f
e
g
h
a - Flat washer
b - Cotter pin retainer
c - End guide
d - Center mark
e - Rubber grommet
f - Shift cable
g - cable barrel
h - Barrel receptacle

Mercury 8 Specifications

General

Full Throttle RPM	5000-6000 RPM
Cylinders	2
Gear Ratio	2.08:1
Horsepower	8 HP
Starting	Manual
Shaft Length	15 in, 20 in
Fuel Tank Capacity	External