Mercury 9.9 User Manual

MAINTENANCE
eng 113
3. Place lubricant tube into the fill hole and add lubricant until it
appears at the vent hole.
28659
IMPORTANT: Replace sealing washers if damaged.
4. Stop adding lubricant. Install the vent plug and sealing
washer before removing the lubricant tube.
5. Remove lubricant tube and reinstall cleaned fill/drain plug
and sealing washer.
28662

Mercury 9.9 Specifications

General

Cylinders	2
Fuel Tank	External
Full Throttle RPM Range	5000 - 6000 RPM
Fuel Induction System	Carbureted
Alternator Amp	6 amp
Horsepower	9.9 hp
Starting	Manual
Shaft Length	15 in, 20 in
Steering	Tiller