Mercury Axius System User Manual

Section 2 - On the Water
CMD-4082082 / 90-8M0052072 eng FEBRUARY 2011 Page 29
1. Press the "TURN" button in the direction of the desired heading change. Each press of the button changes the desired heading
by 10°.
a - Port "TURN" (course adjust) button
b - Starboard "TURN" (course adjust) button
c - "RESUME" button
d - "AUTO HEADING" button
2. Deflect and hold the joystick in the desired direction to make small adjustments in the chosen heading. Each recognized
movement adjusts the chosen heading by 1°.
NOTE: The joystick must move over 50% of its travel and a beep will sound for the movement to be recognized as input.
24707
Adjusting heading to starboard
To Resume a Heading
The "RESUME" button light is on if the previous course heading is available to resume.
IMPORTANT: The previous heading can only be resumed within one minute of Auto Heading being disengaged or if the steering
wheel has been turned no more than 90°.
Press the "RESUME" button to resume the previous heading if you:
• Turned the steering wheel and disengaged Auto Heading.
43579
b
a
c
d

Mercury Axius System Specifications

General

Brand	Mercury
Model	Axius System
Category	Boating Equipment
Language	English