BOW MOUNT OPERATION
eng 23
3. Apply pressure by pushing down on the top housing and the
shaft to lock the motor into the stow position.
Motor in the stowed position
LOWERING THE MOTOR
1. Pull the rope handle to lift the motor up.
2. Do not let the weight of the motor cause it to drop.
3. Gently lower the motor into the water.
Adjusting the Steering Tension (Hand Operated
Motors)
Loosen the steering tension knob until the motor column turns around
freely. Tighten the steering tension knob to secure the motor column
in place.
a - Steering tension knob