MAINTENANCE
eng 31
EVERY 100 HOURS OF USE OR ANNUALLY
• Periodically lubricate all the pivot points with a nonaerosol,
nonsolvent based lubricant.
IMPORTANT: Never use an aerosol lubricant to grease or oil any
part of the unit. Many aerosol lubricants contain harmful propellants
that can cause damage to various parts of the trolling motor.
Lubrication points
a - Rear deck channel grooves
b - Lockslide pin
c - Door knob shaft
d - Forward deck channel grooves
Tube Ref
No.
Description Where Used Part No.
95
2-4-C with PTFE Pivot points 92-802859A 1
• Check the tightness of bolts, nuts, and other fasteners.
•
Inspect the battery. Refer to Battery Inspection.
Storage Preparation
The major consideration in preparing your trolling motor for storage is
to protect it from corrosion and damage caused by freezing of trapped
water.
To Next Page
Loading...
Need help?
General
