GASOLINE ENGINES SKI MODELS
Page 29 of 48
2. 5.7L Model if remote mounting water separating fuel filter: Install inverted flare
swivel (provided) into base of fuel pump. Finger tighten and then grip hex fitting on end
of fuel pump with wrench while tightening swivel an additional 1-3/4 to 2-1/4 turns with
a wrench.
75523
a
a-Fuel Pump Fitting
3. Remove shipping cap from fuel fitting on water separating fuel filter bracket.
NOTE: Mount water separating fuel filter in a location that allows easy removal and installa-
tion.
4. Attach fuel line to water separating fuel filter adapter.
70573
a
a-Water Separating Fuel Filter Adapter
To Next Page
Loading...
