300Mbps Wi-Fi Range Extender
• DHCP Server - Select On, Off or Auto. When Auto is selected, the extender will detect
other DHCP server on the network to determine whether to renew IP address, Gateway
and DNS of this DHCP server or not.
• Start IP Address - Specify an IP address for the DHCP Server to start with when
assigning IP addresses. 192.168.1.100 is the default start address.
• End IP Address - Specify an IP address for the DHCP Server to end with when assigning
IP addresses. 192.168.1.199 is the default end address.
• Address Lease Time - The amount of time a network user will be allowed connection to
the extender with their current dynamic IP Address. Enter the amount of time in minutes
and the user will be leased this dynamic IP Address. After the time is up, the user will be
automatically assigned a new dynamic IP address. The range of the time is 1 ~ 2880
minutes. The default value is 120 minutes.
• Gateway - (Optional.) The default is 0.0.0.0. Enter the LAN IP address of your host router.
• Primary DNS - (Optional.) Enter the DNS IP address provided by your ISP or consult your
ISP.
• Secondary DNS - (Optional.) Enter the IP address of another DNS server if your ISP
provides two DNS servers.
• Host - The name of the DHCP client.
- 13 -