03.2020 4-7
Owner’s Manual: Smoothwall Bin
Paint (Internal):
All fertilizer bins come standard with a polyester
powder coat finish interior. This powder coat
finish protects the interior metal surface when
coming in contact with corrosive materials. If
fertilizer, potash or any other corrosive material
will be placed in the bin, it must have the powder
coat finish paint on the inside to prevent damage
to the metal surface.
Always inspect the interior surface for damage
before filling with corrosive material. Clean and
repaint if any damage is found. Warranty will
be null and void on any unpainted or poorly
maintained bin.
IMPORTANT:
Always follow all paint
application safety instructions
when maintaining the bin.
Additional Options:
• Leg Extensions
• Touch-Up Paint
• Grain or Feed Boot
• Pneumatic Fill System
• Non-Vented Top Lid
• Safety Fill
• Transitions
• 12”, 14”, and 18” Gooseneck Vents
• Moisture and Temperature Cables
• Fan Mounting Bracket
• Lift Hooks
Note:
A variety of control systems and switches are
available to be used with your storage system
for loading and unloading.
Always have a licensed electrician provide the
power and controls for your system. All wiring
should comply with the ANSI/NFPA 70 electrical
requirements.
To Next Page
Loading...
