Merits S539 - How to Replace or Repair the Front Section Assembly; To Replace the Front Shroud; To Replace the Front Wheel Assembly

8
2.4 How to replace or repair the Front Section Assembly
The front section assembly is composed of the front frame, the controller,
the shroud, the front wheel assembly, the tiller assembly, the frame clasper,
and so on.
Press the black clasper (1.09) to separate the front and rear section. [See
Illus. 10]
2.4.1 To replace the front shroud [see Illus. 08]
◆ When to replace the shroud?
◇ The shroud is broken.
◆ How to replace the shroud?
◇ Please proceeding following steps.
1. Loosen screws (7.29) and take the foot matt (7.28) off.
2. Use screw driver to loosen six screws (7.27) and then
remove/replace the shroud (7.21).
2.4.2 To replace the front wheel assembly [See Illus. 09]
 When to replace the front wheel assembly?
◇ The front wheel assembly is worn out, pierced, or deformed.
◆ How to replace the front wheel assembly?
◇ Please proceeding following steps.