3
2.1.3 To replace the seat base plate assembly [See Illus. 01&02]
◆ When to replace the seat base plate assembly?
◇ The seat base plate is deformed or out of shape.
◆ How to replace the seat base plate assembly?
◇ Please proceeding following steps.
Please See 2.1.1& 2.1.2
2.2 How to replace or repair the Battery Pack Assembly
The battery pack assembly is composed of the lower cover, upper cover,
handle, charger socket set, circuit breaker, two batteries, multi electric
harnesses, and so on.
2.2.1 To replace the lower cover assembly [See Illus. 03]
When to replace the lower cover or related parts?
◇ If the lower cover or battery is worn out or broken.
◆ How to replace the lower cover or relation parts?
◇ Please proceeding following steps.
1. Use screwdriver to loosen 8 screws (9.42) to open the cover
assembly.
2. Unplug the harness (9.41), loosen nut (9.38), and then remove the
conducts (9.37).
3. Remove/replace the battery (9.40) and replace the lower cover
(9.33).
2.2.2 To replace the upper cover assembly [See Illus. 03]
When to replace the upper cover or related parts?
◇ The upper cover, circuit breaker, charger socket set, or handle is
worn out or broken.
◇ If the circuit breaker can not reset or broken.
◆ How to replace the upper cover or relation parts?
◇ Please proceeding following steps.
1. Take the battery pack assembly out and separate the upper and
lower covers [See 2.2.1].
2. Loosen the circuit breaker cap (9.23) by hand. Remove/replace the
circuit breaker (9.22).
3. Use screwdriver and wrench to loosen the screw (9.28) and nut
(9.30), and then remove/replace the charger socket set (9.27).
4. Use screwdriver to loosen screws (9.32).
To Next Page
Loading...
