11
2.5 How to replace or repair the Tiller Assembly
The tiller assembly is composed of tiller, upper shroud, lower shroud, horn,
indicator light throttle lever, power indicator, and so on .
2.5.1 To replace the tiller assembly [See Illus. 11]
◆ When to replace the tiller assembly?
◇ The tiller assembly is deformed or out of shape.
◇ Any part of control panel is not working properly.
◆ How to replace the tiller assembly?
◇ Please proceeding following steps.
1. Cut off all ties that bind the tiller main cable (5.80) on the front
frame.
2. Unplug the main cable (5.80).
3. Use hex. tools and wrench to loosen screws (5.12) and nuts (5.14),
and then remove/replace the tiller assembly (5.0).
Illus. 10
To Next Page
Loading...
