3. OPTIONAL ACCESSORIES
Optional presser feet specially prepared for this machine are available at your dealer. The snap-on type
presser foot used on this machine allows easy removal and replacement.
(2) EXTENSION TABLE SET
Extension Table Set J11862
Including extension table, four legs and push pin. Assemble the extension table
and legs according to the illustrations provided with the table. The push pin is
used in the small holes in the table to hold your fabric in place when sewing
circles.
(1) COVER STITCH PRESSER FOOT
9
Elastic Foot G20804A
The Elastic Foot guides and stretches narrow elastic (6-12mm, 1/4~1/2”) wear
lingerie and other elastic insertion techniques
,
.
Cover Hem Foot H10803
With the Cover Hem Foot, you can see your fabric and marked line under the
foot as you sew.
Flat lace foot H10813
With the Flat Lace Foot, you can easily add lace and trims to the top of the
fabric with a cover stitch to create beautiful decorative edges and effects.
Cording Foot Set H10793
With the Cording Foot with Cording Guide, you can create piping, corded tucks
and decorative trims.
Hemming Foot H10833
With the Hemming Foot makes hems more easily. Just insert the fabric into
fabric guide with the folded side down and slide fabric into guide under foot to
needle.
Bias Tape Folder Foot H10843
With the Bias Tape Folder Foot, create straps and belt loops easily using a
cover stitch. Just put a strip into the foot and the strip is folded automatically
and stitched in place.
Bias Tape Binding Foot
Use t
H10823
he Bias Tape binding Foot to sew bias tape along edge of fabric
.
more
easily
Flat Edge Lace Foot H10853
Use the Flat Edge Foot to hem the fabric edge and attach lace at the same
time.
To Next Page
Loading...
Need help?
General
