4
1
3
2
15
* Thread the machine in the order 1 to 4 as shown
at right.
Note : Threads go through the take-up lever cover
for Chain stitching as shown.
threads to
them through
your new
Tip : Your new machine is threaded to sew a
standard “Triple Cover Stitch”. Tie your own
these threads and carefully pull
the machine, to easily thread
Triple Cover Stitch machine the first
time.
12. GENERAL THREADING INFORMATION
(1) TO THREAD
(BROWN)THREAD
* Thread the chain stitch/cover stitch looper as
indicated 1~12.
* Raise Presser foot to release Tension discs.
* Pass thread from back to the front through the
thread guide 1.
CHAIN STITCH/ COVER
STITCH LOOPER
* Thread the top cover thread guide by pulling the
thread towards the right until it slips under guide.
Then pull thread along the right side of button as
illustrated.
1
2
3
1
4
5
7
8
6
9
10
12
11
2
2
To Next Page
Loading...
Need help?
General
