12
8. HOW TO OPEN AND CLOSE LOOPER
COVER
(1) OPEN LOOPER COVER
* Push the looper cover to the right as far as it will
go.
* Pull looper cover down toward you.
* First pull the looper cover upward and then slide it
to the left until it locks.
Note : The looper cover has a safety switch and the
machine will not sew if the looper cover is
open.
(2) CLOSE LOOPER COVER
(3) SPOOL CAP
Spool cap
Thread spool
Press in
* When using a regular thread spool, fit the spool
cap supplied with the machine onto the thread
spool as shown at right.
Be sure to turn off power switch.
Be sure looper cover is closed when sewing.
1
2
To Next Page
Loading...
Need help?
General
