Safety Precautions14
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and
operating this product.
If an optional power supply is used, it must be one supplied by Meru Networks.
The AP822 is intended only for installation in Environment A as defined in IEEE Std 802.3af.
All interconnected equipment must be contained within the same building, including the inter-
connected equipment's associated LAN connection.
This product is intended to be supplied by a UL Listed power supply marked Class 2 or LPS and rated
12Vdc, 2A. For Power over Ethernet, an 802.3af or 802.3at connection must be used.
To Next Page
Loading...