33
6.
Verify that the AP comes online.
AP Removal from Interlude & Silhouette T-Bar
1. To remove the AP from ceiling, release the locking mechanism by pressing tab up, toward
the ceiling and slide the AP from right to left until it releases.
2. To remove the 15/16” T-Bar adapter/Wall mount adapter from the T-Bar, depress both T-
Bar locks at the same time and twist counter-clockwise to release.
Above a Standard Suspended Ceiling
By removing plastic facade, AP822e can be installed in air-handling space. Use the optional T-
bar box hanger mounting kit to mount AP822e above suspended ceiling T- rails. The installa-
tion attaches the T-bar box hanger to the ceiling rails and then the AP822e attaches to the T-
bar box hanger.
AP822e mounted above the ceiling has about 2-3 dBm less RF coverage than AP822e
mounted under the ceiling.