Meru Networks AP822 User Manual

Before You Begin16
Kensington Lock
The AP822e has an access slot at the back to support Kensington Lock. Users can lock the
AP822e with a standard security cable, such as those used to secure laptop computers. See
“AP822 Kensington lock” on page 16 for location of AP822 Kensington Lock.
Figure 1: AP822 Kensington lock
Power Options
A power source is needed to power the AP822e. The AP822e requires either IEEE Std
802.3af or IEEE Std 802.3at compatible external Power-over-Ethernet (PoE) switch or PoE
injector. If the PoE power source is not available, a 12-V DC power (2A rated) must be sup-
plied.
When connected to an IEEE Std 802.3af PoE power source, both the USB and the secondary Ethernet
port (G2) shall be disabled due to power limitations.
AP822 is intended to be supplied by a UL listed power supply marked Class 2 or LPS and rated 12Vdc,
2A. If an optional power supply is used, it must be one supplied by Meru Networks.

Meru Networks AP822 Specifications

General

Brand	Meru Networks
Model	AP822
Category	Wireless Access Point
Language	English