39
5 Approved Antennas
Only approved antennas may be used in conjunction with AP822 access points. Access
Points have been designed to operate with the antennas listed below. Antennas not included
in this list are strictly prohibited for use with these devices. The required antenna impedance
is 50 ohms.
TABLE 5: Approved Antennas
Meru Part Numbers Gain Description
ANT-ABGN23O-W 2/3 dBi Dual band Omni-directional dipole antenna
ANT-ABGN47O 4.7/4.7 dBi Dual band high gain dipole Omni directional
antenna
ANT-O4ABGN-0606-O 6/6 dBi Dual band Omni directional 4-lead antenna
ANT-I2ABGN-0304-O 3/4 dBi Dual band ceiling mount Omni directional 2-
lead antenna
ANT-O4ABGN-0607-
PT
6/7 dBi Dual band wall mount patch 4-lead antenna
ANT-ABGN-0406-W 4/6dBi Dual band Omni-directional antenna single
feed