AP822e Antennas 17
AP822e Antennas
Radio-Antenna-Port Mappings
The following table lists which radio is associated with each antenna.
Attaching Antennas
An AP822e has four external antenna ports, labeled A1, A3, A4 and A6, to be used for attach-
ing the antennas supplied with the AP. Do not leave any antenna connector open. All connec-
tors on the AP must be terminated either with antennas or with 50 ohm Reverse Polarity SMA
terminators. For a list of approved terminators, see http://www.merunetworks.com/merusup-
port.
Antennas attached to a specific radio in AP822e must all be of the same model. In case of
replacement, user must replace all the antennas.
TABLE 2: Radio-Antenna-Port Mappings
Antenna Port Radio / Channel
A1 Radio 1
A3 Radio 1
A4 Radio 2
A6 Radio 2
To Next Page
Loading...