ES-405-9800 Manual Rev A Page 17
Pressing the Enter key while in the Operate screen will either bring up the Start or Stop screen
depending on whether the instrument is currently sampling or not.
4.3 Using the Main ES-405 Menu System and Clearing Memory
MENU SCREEN: The first line of the Menu screen is Start or Stop depending on whether the
instrument is currently sampling or not.
The main ES-405 menu system can be entered at almost any time by pressing the MENU key.
Use the ▲▼ arrow keys to select the desired menu option, then press the MENU key to enter the
selected sub-menu. The functions in the SETUP and CALIBRATE menus are described in Section
6 and 7.
SETUP: This is the setup menu for the ES-405. All the setup parameters in this menu are
described in Section 6.
CALIBRATE: This is the field calibration menu for the ES-405. All the calibrations and tests in
this menu are described in Section 7.
ABOUT: This menu option displays the ES-405 model number, firmware version and revision,
and serial number as shown in the example below. Press the MENU/SELECT key to return to the
main menu.
To Next Page