ES-405-9800 Manual Rev A Page 29
<Esc>rv
ES-405, 83904, R1.2.0.0a
9.5.4 Checksum Computation
Checksum is calculated as the 16 bit unsigned integer sum of all characters after the <Esc>
character up to but not Including the Checksum Delimiter Character * (0x2A). It is printed out as
an ASCII decimal number.
The result is always 5 characters in length with leading zeros.
A valid checksum may be signaled in the following manner: *//<cr>
A computer command example follows:
<Esc>rv*//
ES-405, 83904, R1.2.0.0a*01278
9.5.5 Serial Command List
The command set descriptions are listed in the following table:
To Next Page