ES-405-9800 Manual Rev A Page 34
It connects to the ES-405 through the RS-485 SENSOR connector on the bottom of the monitor.
This connection both provides power to the sensor and collects its digital output string to provide
wind speed and direction information.
This type of sensor includes an internal compass for wind direction correction and does not
require manual orientation when deployed. Consult the separate manual that comes with the wind
sensor for details.
10.2.3 597A
The 597A measures ambient temperature, relative humidity, and barometric pressure. It connects
to the ES-405 through the RS-485 SENSOR connector
10.3 CCS Modem 2
The Met One Instruments, Inc. Comet Cloud Service (CCS) modem provides real time remote
connectivity to the ES-405. A personalized webpage dashboard gives current measurement
values graphically and in tabular form. The private link can be shared with other authorized users
allowing easy data sharing across an organization. Data is stored in the cloud for 2+ years, and
can be downloaded to a computer or other device at any time. It connects to the ES-405 through
the RS-485 SERIAL connector.
To Previous Page
Loading...